Varistor Metal Oxide Varistor Products Page 169 Varistor Metal-Oxide Varistor Products

2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/14/17 Metal-Oxide Varistors (MOVs) Radial Leaded Varistors > HMOV Varistor Series Part Numbering System Littelfuse Varistor V 10 H 11 XXXXX Disc Size 10, 14 or 20 mm Coating H: Silicone VM(AC)RMS 11V to 625V P L1 B Lead-Free and RoHS Compliant Other Non-Standard Options Packaging Blank or B: Bulk Pack T: Tape and Reel A: Ammo Pack 5 Lead Spacing Options Blank: Standard lead spacing (See Dimensions Table) 5: 5mm+/-1.0mm 7: 7.5mm+/-1.0mm 1: 10mm+/-1.0mm Lead Formation Blank or L1: Straight L2: Outer Crimp L3: In-Line L4: Trim/Outer Crimp(Bulk pack only) L5: Inner Crimp SYMBOL DESCRIPTION 10mm 14mm 20mm (11Vac to 95Vac voltage) ( 115Vac voltage) P Pitch of Component 25.4 +/- 1.0 P 0 Feed Hole Pitch 12.7 +/- 0.2 P 1 Feed Hole Center to Pitch 8.85 +/- 0.7 7.70 +/- 0.7 P 2 Hole Center to Component Center 12.7 +/- 0.7 F Lead to Lead Distance 7.5 +/- 1.0 10 +/- 1.0 h Component Alignment 2.0 Max W Tape Width 18.0 +1.0 / -0.5 W 0 Hold Down Tape Width 12.0 +/- 0.3 W 1 Hole Position 9.0 +0.75 / -0.50 W 2 Hold Down Tape Position 0.5 Max H Height from Tape Center to Component Base 18.0 +2.0 / -0.0 H 0 Seating Plane Height 16.0 +/- 0.5 H 1 Component Height 36.0 Max 40.0 Max 46.5 Max D 0 Feed Hole Diameter 4.0 +/- 0.2 t Total Tape Thickness 0.7 +/- 0.2 U Undercrimp Width 8.0 Max p Component Alignment 3 Max 3 Max 3 Max 3 Max Tape and Reel Specifications (continued) NOTES: Radial devices on tape are supplied with crimped leads, straight leads, or under-crimped leads Leads are offset by product dimension e1 Conforms to ANSI and EIA specifications Can be supplied to IEC Publication 286-2

Previous Page
Next Page