Varistor Metal Oxide Varistor Products Page 158 Varistor Metal-Oxide Varistor Products

2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/14/17 Metal-Oxide Varistors (MOVs) Radial Leaded Varistors > AUMOV Varistor Series Part Numbering System Littelfuse Varistor V 05 E 14 XXXXX Disc Size 05, 07, 10, 14 or 20 mm Coating E: Epoxy P: Phenolic H: Silicone Available for 10, 14, or 20mm VM(AC)RMS 14V to 625V AUTO L1 B AUMOV Series AEC-Q200 Table 10 Compliant for Phenolic and Silicone coating Other Non-Standard Options Packaging Blank or B: Bulk Pack T: Tape and Reel A: Ammo Pack Lead Formation Blank or L1: Straight L2: Outer Crimp L3: In-Line L4: Trim/Outer Crimp (Bulk pack only) L5: Inner Crimp Note: for Vm(AC) 100V to 625V parts, the L1, L2, L3, L4, and L5 should be replaced by 1,2,3,4, and 5 respectively SYMBOL DESCRIPTION MODEL SIZE 5mm 7mm 10mm 14mm 20mm (11Vac to 95Vac voltage) g 115 Vac Voltage P Pitch of Component 12.7 +/- 1.0 12.7 +/- 1.0 25.4 +/- 1.0 25.4 +/- 1.0 25.4 +/- 1.0 25.4 +/- 1.0 P 0 Feed Hole Pitch 12.7 +/- 0.2 12.7 +/- 0.2 12.7 +/- 0.2 12.7 +/- 0.2 12.7 +/- 0.2 12.7 +/- 0.2 P 1 Feed Hole Center to Pitch 3.85 +/- 0.7 3.85 +/- 0.7 8.85 +/- 0.7 8.85 +/- 0.7 8.85 +/- 0.7 7.70 +/- 0.7 P 2 Hole Center to Component Center 6.35 +/- 1.0 6.35 +/- 1.0 12.7 +/- 0.7 12.7 +/- 0.7 12.7 +/- 0.7 12.7 +/- 0.7 F Lead to Lead Distance 5.0 +/- 1.0 5.0 +/-1.0 7.5 +/- 1.0 7.5 +/- 1.0 7.5 +/- 1.0 10 +/- 1.0 h Component Alignment 2.0 Max W Tape Width 18.0 +1.0 / -0.5 18.0 +1.0 / -0.5 18.0 +1.0 / -0.5 18.0 +1.0 / -0.5 18.0 +1.0 / -0.5 18.0 + 1.0 / -0.5 W 0 Hold Down Tape Width 12.0 +/- 0.3 12.0 +/- 0.3 12.0 +/- 0.3 12.0 +/- 0.3 12.0 +/- 0.3 12.0 +/- 0.3 W 1 Hole Position 9.0 +0.75 / -0.50 9.0 +0.75 / -0.50 9.0 +0.75 / -0.50 9.0 +0.75 / -0.50 9.0 +0.75 / -0.50 9.0 +0.75 / -0.50 W 2 Hold Down Tape Position 0.5 Max H Height from Tape Center to Component Base 18.0 +2.0 / -0.0 18.0 +2.0 / -0.0 18.0 +2.0 / -0.0 18.0 +2.0 / -0.0 18.0 +2.0 / -0.0 18.0 +2.0 / -0.0 H 0 Seating Plane Height 16.0 +/- 0.5 16.0 +/- 0.5 16.0 +/- 0.5 16.0 +/- 0.5 16.0 +/- 0.5 16.0 +/- 0.5 H 1 Component Height 29.0 Max 32.0 Max 36.0 Max 40.0 Max 46.5 Max 46.5 Max D 0 Feed Hole Diameter 4.0 +/- 0.2 4.0 +/- 0.2 4.0 +/- 0.2 4.0 +/- 0.2 4.0 +/- 0.2 4.0 +/- 0.2 t Total Tape Thickness 0.7 +/- 0.2 0.7 +/- 0.2 0.7 +/- 0.2 0.7 +/- 0.2 0.7 +/- 0.2 0.7 +/- 0.2 U Undercrimp Width 8.0 Max p Component Alignment 3 Max 3 Max 3 Max 3 Max 3 Max 3 Max Tape and Reel Specifications (continued) NOTES: Radial devices on tape are supplied with crimped leads, straight leads, or under-crimped leads Leads are offset by product dimension e1 Conforms to ANSI and EIA specifications Can be supplied to IEC Publication 286-2 10mm parts are available on tape and reel up to 510 VAC only 14mm and 20mm parts are available on tape and reel up to 550 VAC only

Previous Page
Next Page