Tvs Diode Array Spa Diodes Page 66 TVS Diode Array SPA Diodes Catalog

2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 02/23/17 TVS Diode Arrays (SPA Diodes) General Purpose ESD Protection - SP1003 Series 0.0 2.0 4.0 6.0 8.0 10.0 12.0 14.0 1 2 3 4 5 6 7 Peak Pulse Current-I PP (A) Clamp Voltage (V C ) CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Absolute Maximum Ratings Symbol Parameter Value Units I PP Peak Pulse Current (t p =8/20 s) 7.0 A T OP Operating Temperature -40 to 125C T STOR Storage Temperature -55 to 150C Thermal Information Parameter Rating Units Storage Temperature Range -55 to 150C Maximum Junction Temperature 150C Maximum Lead Temperature (Soldering 20-40s) 260C Electrical Characteristics (T OP =25 C) Parameter Symbol Test Conditions Min Typ Max Units Forward Voltage Drop V F I F = 10mA 0.8 1.2 V Reverse Voltage Drop V R I R =1mA 6.0 7.8 8.5 V Reverse Standoff Voltage V RWM I R 1A 5.0 V Reverse Leakage Current I LEAK V R =5V 100 nA Clamp Voltage 1 V C I pp =6A t p =8/20s 11.4 V I pp =7A t p =8/20s 12.0 V Dynamic Resistance R DYN TLP, t p =100ns, 1/O to GND 0.25 ESD Withstand Voltage 1 V ESD IEC61000-4-2 (Contact Discharge) 30 kV IEC61000-4-2 (Air Discharge) 30 kV Diode Capacitance 1 C D Reverse Bias=0V 30 pF Note: 1 Parameter is guaranteed by design and/or device characterization. Capacitance vs. Reverse Bias Clamping Voltage vs. I PP 0.0 5.0 10.0 15.0 20.0 25.0 30.0 35.0 40.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 DC Bias (V) Capacitance (pF)

Previous Page
Next Page