Tvs Diode Array Spa Diodes Page 137 TVS Diode Array SPA Diodes Catalog

2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 02/23/17 TVS Diode Arrays (SPA Diodes) Low Capacitance ESD Protection - SP3012 Series Description Applications The SP3012 Series integrates either 3, 4 or 6 channels of ultra low capacitance rail-to-rail diodes and an additional zener diode to provide protection for electronic equipment that may experience destructive electrostatic discharges (ESD). These robust devices can safely absorb repetitive ESD strikes above the maximum level specified in the IEC 61000-4-2 international standard (8kV contact discharge) without performance degradation. The extremely low loading capacitance also makes it ideal for protecting high speed signal lines such as USB3.0, HDMI, USB2.0, and eSATA. Features ESD, IEC 61000-4-2, 12kV contact, 25kV air EFT, IEC 61000-4-4, 40A (t P =5/50ns) Lightning, IEC 61000- 4-5 2nd edition, 4A (t P =8/20 s) Low capacitance of 0.5pF (TYP) per I/O Low leakage current of 1.5 A (MAX) at 5V Small form factor DFN (JEDEC MO-229) and SOT23-6 (JEDEC MO- 178AB) packages provide flow through routing to simplify PCB layout AEC-Q101 Qaulified ( DFN10 and DFN14) RoHS compliant and lead- free LCD/PDP TVs External Storages DVD/Blu-ray Players Desktops MP3/PMP Set Top Boxes Smartphones Ultrabooks/Notebooks Digital Cameras Automotive Electronics Pinout Functional Block Diagram Life Support Note: Not Intended for Use in Life Support or Life Saving Applications The products shown herein are not designed for use in life sustaining or life saving applications unless otherwise expressly indicated. Application Example for USB3.0 SP3012 Series 0.5pF Diode Array for USB3.0 RoHS Pb GREEN PIN 14 PIN 13 PIN 8 PIN 10 PIN 9 PIN 11 PIN 12 PIN 1 PIN 2 PIN 4 PIN 5 GND (PIN 3, 8) SP3012-04UTG GND (PIN 2) PIN 1 PIN 4 PIN 5 SP3012-03UTG SP3012-06UTG PIN 1 PIN 3 PIN 4 PIN 6 GND (PIN 2) SP3012-04HTG 8 7 14 1 SP3012-06UTG (AEC-Q101 Qualified) SP3012-03UTG 6 7 8 9 10 SP3012-04UTG (AEC-Q101 Qualified) SP3012-04HTG 3 2 1 4 5 6 5 4 3 2 1 1 2 3 6 5 4 *Pins 6, 7, 9, 10 are not internally connected but should be connected to the trace. *Pins 1, 2, 3, 4, 5, 6, 7 are not internally connected but should be connected to the opposite pin with the PCB trace. Additional Information Datasheet Resources Samples Signal GND USB Controller USB Port V BUS SSTX+ SSTX- SSRX+ SSRX- GND D+ D- SP3012-06UTG IC

Previous Page
Next Page