Tvs Diode Array Spa Diodes Page 109 TVS Diode Array SPA Diodes Catalog

2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 02/23/17 TVS Diode Arrays (SPA Diodes) Low Capacitance ESD Protection - SP3002 Series CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Absolute Maximum Ratings Symbol Parameter Value Units I PP Peak Current (t p =8/20 s) 4.5 A T OP Operating Temperature -40 to 125C T STOR Storage Temperature -55 to 150C Thermal Information Parameter Rating Units Storage Temperature Range -55 to 150 C Maximum Junction Temperature 150C Maximum Lead Temperature (Soldering 20-40s) 260C Electrical Characteristics (T OP =25 C) Parameter Symbol Test Conditions Min Typ Max Units Reverse Standoff Voltage V RWM I R 1A 6.0 V Reverse Leakage Current I LEAK V R =5V 0.5 A Clamp Voltage 1 V C I PP =1A, t p =8/20s, Fwd 9.5 11.0 V I PP =2A, t p =8/20s, Fwd 10.6 13.0 V ESD Withstand Voltage 1 V ESD IEC61000-4-2 (Contact) 12 kV IEC61000-4-2 (Air) 15 kV Diode Capacitance 1 C I/O-GND Reverse Bias=0V 0.95 1.1 1.25 pF Reverse Bias=1.65V 0.7 0.85 1.0 pF Diode Capacitance 1 C I/O-I/O Reverse Bias=0V 0.5 pF Note: 1. Parameter is guaranteed by design and/or device characterization. Capacitance vs. Bias Voltage Insertion Loss (S21) I/O to GND -20 -15 -10 -5 0 1.E+06 1.E+07 1.E+08 1.E+09 1.E+10 Frequency [Hz] Insertion Loss [dB] 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 1.50 1.40 1.30 1.20 1.10 1.00 0.90 0.80 0.70 0.60 0.50 I/O Capacitance (pF) I/O DC Bias (V) V CC = 5V V CC = 3.3V V CC = Float

Previous Page
Next Page