Sidactor Protection Thyristor Products Page 84 SIDACtor Protection Thyristor Products

SIDACtor Protection Thyristors 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 02/23/17 Teccor brand SIDACtor DSL Protection Devices Soldering Parameters Physical Specifications Environmental Specifications Terminal Material 100% Matte-Tin Plated Solderability EIA J-STD-002, TEST A. Temp Cycling Mil-STD-883, Method 1010.8 Condition C, -65C to +150C 168 Hrs, 85C /60%RH+3IR-Reflow, 260C +5V, -0C Bias Humidity JESD 22-A101 85C , 85CRH. 50V 168 Hrs, 85C /60%RH+3IR-Reflow, 260C +5V, -0C Pressure Cooker JEDEC 22-A102 No Bias, 121C, 100%RH 96Hrs/192Hrs. 168 Hrs, 85C /60%RH+3IR-Reflow, 260C +5V, -0C High Temp Storage JESD 22-A103 Con B. 150C, no bias 1000Hrs HTRB JESD 22-108 168 Hrs, 85C /60%RH+3IR-Reflow, 260C +5V, -0C Thermal Shock Mil-STD-883, Method 1011.9 Condition A, 0C to 100C 168 Hrs, 85C /60%RH+3IR-Reflow, 260C +5V, -0C C-SAM As per flow, JSTD-020 pre&post preconditioning test. Wet Humidity (Tin only) NEMI standard: 60C/93%RH Reflow Condition Pb-Free assembly (see Fig. 1) Pre Heat - Temperature Min (T s(min) ) +150C - Temperature Max (T s(max) ) +200C - Time (Min to Max) (t s ) 60-180 secs. Average ramp up rate (Liquidus Temp (T L ) to peak) 3C/sec. Max. T S(max) to T L - Ramp-up Rate 3C/sec. Max. Reflow - Temperature (T L ) (Liquidus) +217C - Temperature (t L ) 60-150 secs. Peak Temp (T P ) +260(+0/-5)C Time within 5C of actual Peak Temp (t p ) 30 secs. Max. Ramp-down Rate 6C/sec. Max. Time 25C to Peak Temp (T P ) 8 min. Max. Do not exceed +260C Time Temperature T P T L T S(max) T S(min) 25 t P t L t S time to peak temperature (t 25C to peak) Ramp-down Ramp-up Preheat Critical Zone T L to T P Figure 1 Time Temperature T P T L T S(max) T S(min) 25 t P t L t S time to peak temperature (t 25C to peak) Ramp-down Ramp-up Preheat Critical Zone T L to T P Figure 1 Part Marking Part Numbering SDP xxx 0 T023G RP Type Nominal Working voltage: Construction variable: Package Surge Ipp rating Packing Option RP: Reel Pack SIDACtor DSL Protector 008=8V 012=12V 018=18V 024=24V 0=single chip T023=SOT23-5 Number of pins 5 Pin 1 indicator Part Marking Code PXXG 1 2 3 4 5

Previous Page
Next Page