Sidactor Protection Thyristor Products Page 74 SIDACtor Protection Thyristor Products

SIDACtor Protection Thyristors 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 02/23/17 Broadband Optimized TM Protection Dimensions Inches Millimeters Min Max Min Max A 0.041 0.057 1.050 1.450 A1 0.000 0.006 0.000 0.150 A2 0.041 0.051 1.050 1.300 b 0.014 0.020 0.350 0.508 C 0.004 0.008 0.090 0.200 D 0.110 0.118 2.800 3.000 E 0.102 0.118 2.600 3.000 E1 0.057 0.069 1.450 1.750 e 0.037 (BSC) 0.950 (BSC) e1 0.071 0.075 1.800 1.900 L (note 4.5) 0.004 0.023 0.100 0.600 N (note 6) 6 0C 10C 0C 10C M - 0.102 - 2.590 O - 0.027 - 0.690 P - 0.039 - 0.990 R - 0.038 - 0.950 O P R M Recommended Solder Pad Layout Notes: 1. Dimensioning and tolearances per ANSI 14.5M-1982. 2. Package conforms to EIAJ SC-74 (1992) 3. Dimensions D and E1 are exclusive of mold flash, protrusions, or gate burrs. 4. Foot lenth L measured at reference to seatng plane. 5. "L " is the length of flat foot surface for soldering to substrate. 6. "N" is the number of terminal positions. 7. Controlling dimension: MILLIMETER. Converted inch dimensions are not necessarily exact. Dimensions - SOT23-6 Environmental Specifications Temp Cycling Mil-STD-883, Method 1010.8 Condition C, -65C to +150C 168 Hrs, 85C /60%RH+3IR-Reflow, 260C +5V, -0C Bias Humidity JESD 22-A101 85C , 85CRH. 50V 168 Hrs, 85C /60%RH+3IR-Reflow, 260C +5V, -0C Pressure Cooker JEDEC 22-A102 No Bias, 121C, 100%RH 96Hrs/192Hrs. 168 Hrs, 85C /60%RH+3IR-Reflow, 260C +5V, -0C High Temp Storage JESD 22-A103 Con B. 150C, no bias 1000Hrs HTRB JESD 22-108 168 Hrs, 85C /60%RH+3IR-Reflow, 260C +5V, -0C Thermal Shock Mil-STD-883, Method 1011.9 Condition A, 0C to 100C 168 Hrs, 85C /60%RH+3IR-Reflow, 260C +5V, -0C C-SAM As per flow, JSTD-020 pre&post preconditioning test. Wet Humidity (Tin only) JESD 201 standard: 55C/85%RH Notes: 1. All dimensions are in millimeters. 2. Dimensions include solder plating. 3. Dimensions are exclusive of mold flash & metal burr. 4. All specifications comply to JEDEC MO-178 5. Blo is facing up for mold and facing down for trim/form, i.e. reverse trim/form. 6. Package surface matte tine Physical Specifications Lead Plating SOT23: Matte Tin Lead Material Copper Alloy Lead Coplanarity 0.0004 inches (0.102mm) Subsitute Material Silicon Body Material Molded Epoxy Flammability V-0

Previous Page
Next Page