Sidactor Protection Thyristor Products Page 127 SIDACtor Protection Thyristor Products

SIDACtor Protection Thyristors 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 02/23/17 Broadband Optimized TM Protection Package Type Description Packing Options Quantity Added Suffix Lead Spacing Industry Standard E TO-92 Tape and Reel Pack 2000 RP1 0.1 inch (2.54mm) EIA-481-D RP2 0.2 inch (5.08mm) TO-92 Ammo Pack AP (Not applicable) EIA-468-B TO-92 Bulk Pack N/A (Not applicable) N/A Packing Options All leads are insulated from case. Case is electri- cally non-conductive. (Rated at 1600 V (AC) RMS for one minute from leads to case over the operating temperature range.) Mold flash shall not exceed 0.13 mm per side. A B Temperature Measurement Point MT2/PIN 3 MT1/PIN 1 E H G D K J L M N The TO-92 is designed to meet mechanical standards as set forth in JEDEC publication number 95. Inches Millimeters Min Max Min Max A 0.176 0.196 4.47 4.98 B 0.500 12.70 D 0.095 0.105 2.41 2.67 E 0.150 3.81 G 0.135 0.145 3.43 3.68 H 0.088 0.096 2.23 2.44 J 0.176 0.186 4.47 4.73 K 0.088 0.096 2.23 2.44 L 0.013 0.019 0.33 0.48 M 0.013 0.017 0.33 0.43 N 0.60 1.52 Dimensions - TO-92 Tape and Reel Specification - TO-92 Inches Millimeters Min Max Min Max A N/A 14.173 N/A 360.0 B 4.016 N/A 102.0 N/A C 3.386 N/A 86.0 N/A D 0.795 N/A 20.2 N/A W1 1.181 1.968 30.0 50.0 P 0.496 0.504 12.60 12.80 P0 0.498 0.502 12.65 12.75 F(for RP1) 0.090 0.110 2.29 2.80 F(for RP2) 0.182 0.244 4.63 6.19 H N/A 1.673 N/A 42.50 H1 N/A 1.270 N/A 32.26 W 0.674 0.763 17.12 19.38 W2 0.354 0.370 8.25 9.75 W3 0.236 N/A 6.00 N/A W4 0.020 N/A 0.50 N/A Ammo Pack Specification - TO-92 Flat down 25 Devices per fold 0.708 (18.0) 1.27 (32.2) 0.125 (3.2) MAX 1.62 (41.2) MAX 0.50 (12.7) 0.354 (9.0) 0.236 (6.0) 0.02 (0.5) 0.20 (5.08) 0.50 (12.7) 0.25 (6.35) Direction of Feed Dimensions are in inches (and millimeters). 1.7 (43) 12.9 (327) 6.9 (175) 1.7 (43) 0.157 DIA (4.0) A B D C W1 FLAT SIDE OF TO-92 ROUND SIDE OF TO-92 H W3 W W4 H1 W2 P P0 F (RP1) F (RP2) Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics.

Previous Page
Next Page