Resettable Ptc Products Page 120 Resettable PTC Products

POLY-FUSE Resettable PTCs 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/22/17 Radial Leaded > 600R Series Dimension EIA Mark IEC Mark Dimensions Dim. (mm) Tol. (mm) Carrier tape width W 18 -0.5 / +1.0 Hold down tape width: W 4 W 0 11 min. Top distance between tape edges W 6 W 2 3 max. Sprocket hole position W 5 W 1 9 -0.5 / +0.75 Sprocket hole diameter* D 0 D 0 4 -0.32 / +0.2 Abscissa to plane(straight lead) H 18.5 -/+ 3.0 Abscissa to plane(kinked lead) H 0 H 0 16 -/+ 0.5 Abscissa to top H 1 H 1 32.2 max. Overall width w/o lead protrusion C 1 42.5 max. Overall width w/ lead protrusion C 2 43.2 max. Lead protrusion L 1 l 1 1.0 max. Protrusion of cut out L 11 max. Protrusion beyond hold-down tape l 2 l 2 Not specified Sprocket hole pitch: 600R150 & 600R160 P 0 P 0 25.4 -/+ 0.5 Device pitch: 600R150 & 600R160 25.4 Pitch tolerance 20 consecutive. -/+ 1 Tape thickness t 0.9 max. Tape thickness with splice t 1 2.0 max. Splice sprocket hole alignment 0 -/+ 0.3 Body lateral deviation h 0 -/+ 1.0 Body tape plane deviation p 0 -/+ 1.3 Ordinate to adjacent component lead* P 1 P 1 3.81 -/+ 0.7 Lead spacing F 5.08 -/+ 0.8 Tape and Ammo Specifications Devices taped using EIA468-B/IE286-2 standards. See table below and Figure 1 for details. *Differs from EIA Specification Tape and Ammo Diagram A B A1 L1 P0 D0 F L W4 H0 I2 H1 W5 W Reference plane h H1 H C1 C2 h p Direction of unreeling Cross section A - B t Figure 1 Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics.

Previous Page
Next Page