Fuse Mounting Accessories Page 33 Fuse & Mounting Accessories

2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/03/17 Surface Mount Fuses Ceramic Fuse > 501 Series Average Time Current Curves 0.001 0.010 0.100 1.000 10.000 100.000 TIME IN SECONDS 1 10 100 1000 CURRENT IN AMPERES 10A 20A 15A 12A Reflow Condition Pb - free assembly Pre Heat - Temperature Min (T s(min) ) 150C - Temperature Max (T s(max) ) 200C - Time (Min to Max) (t s ) 60 - 180 seconds Average Ramp-up Rate (Liquidus Temp (T L ) to peak) 3C/second max. T S(max) to T L - Ramp-up Rate 5C/second max. Reflow - Temperature (T L ) (Liquidus) 217C - Temperature (t L ) 60 - 150 seconds Peak Temperature (T P ) 260 +0/-5 C Time within 5C of actual peak Temperature (t p ) 10 - 30 seconds Ramp-down Rate 6C/second max. Time 25C to peak Temperature (T P ) 8 minutes max. Do not exceed 260C Soldering Parameters Temperature Re-rating Curve 40 60 80 100 120 140 -65 -45 -25 -5 15 35 55 75 95 115 135 155 TEMPERATURE (C) PERCENT OF RATING Wave Soldering 260C, 10 seconds max. Example: For continuous operation at 75 degrees celsius, the fuse should be rerated as follows: I = (0.80)(0.85)I RAT = (0.68)I RAT Note: 1. Re-rating depicted in this curve is in addition to the standard re-rating of 20% for continuous operation. Time Temperature T P T L T S(max) T S(min) 25 t P t L t S time to peak temperature (t 25C to peak) Ramp-down Ramp-up Preheat Critical Zone T L to T P

Previous Page
Next Page