Fuse Mounting Accessories Page 186 Fuse & Mounting Accessories

2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/03/17 Radial Leaded Fuse Holders Product Characteristics Dimensions units in inch (mm) Compatible Fuses MICRO TM /TR3 Description Panel mount holder designed for Littelfuse MICRO/ TR3 type and other fuse series with .025" diameter leads rated to 5 amps Electrical Specs Rated at 5 amperes for any voltage up to 125 Mounting Specs Maximum panel thickness is .09" Ambient Temp. -40C to +125C Retaining Hardware "Push-On" retaining nut Molded Material Black Thermoset Terminal Material Beryllium copper with silver plating 281/282 Series Panel Mount Holders for MICRO TM /TR3 Fuses Note: Ensure proper fuseholder re-rating. Product Characteristics Dimensions units in inch (mm) Compatible Fuses MICRO TM /TR3 Description RF-shielded and drip-proof screw-on knob design enables use of Littelfuse MICRO/ TR3 fuses when presence of moisture exists at front of panels Electrical Specs Rated at 5 amperes for any voltage up to 125 Mounting Specs Front panel mount, maximum panel thickness: .093" Rear panel mount, maximum panel thickness: .125" Ambient Temp. -40C to +125C Mounting Gasket Options Neoprene (282001, 282002) or Conductive Silicone (282007, 282008) Retaining Hardware Options Threaded Hex Nut (282002, 282008) or Threaded Knurled Nut (282001, 282007) Molded Material Black thermoset Housing, Knob and Nut Material Aluminum, untreated Terminal Material Beryllium copper with silver plating Knob Seal Buna "N" O-ring inside the knob .345" .350" .380" .385" .46" .015" GASKET BODY PANEL KNOB KNURLED NUT .73" REF. .10" REF. .63" REF. .50" REF. .22" .015" Mounting Hole .345" .350" .380" .385" .46" .015" HEX NUT PANEL KNOB BODY GASKET .90" REF. .66" REF. .50" REF. Mounting Hole 0282 0001 and 0282 0007 Front of Panel Mounting with Threaded Hex / Rear Retaining Nut 0282 0002 and 0282 0008 Rear of Panel Mounting with Threaded Knurled / Front Retaining Nut Rear of Panel Mounting with Threaded Knurled / Front Retaining Nut Front of Panel Mounting with Threaded Hex / Rear Retaining Nut Note: Ensure proper fuseholder re-rating. Front of Panel Mounting with Push-On / Rear Retaining Nut Note: These products are shipped unassembled and without fuse device 282 Series Panel Mount - Sealed/Moisture Resist Knob 281 Series Panel Mount Mounting Hole 0281 0001 Front of Panel Mounting with Push-On / Rear Retaining Nut .45" REF. .25" .39" REF. .158" .160" .190" .193" Specifications are subject to change without notice. Application testing is strongly recommended.

Previous Page
Next Page